DURSTEEL 510 – Wear resistant steel
DURSTEEL 510 is a quenched & tempered high abrasion resistant steel with a nominal hardness of 510 HB. It can withstand very severe wear conditions. Its mechanical properties are obtained by hardening. In addition to its hardness and toughness characteristics, the high quality of the quenching process allows DURSTEEL 510 wear-resistant steel to be easy to processed and to be welded. DURSTEEL 510 has good rolling and bending properties. It is however necessary to take special precautions during its processing. DURSTEEL 510 wear-resistant steel maintains its properties up to a temperature of 250°C. The use of DURSTEEL 510 for heat treatment or hot dip galvanizing is not recommended. For all uses of abrasion resistant steel at higher temperatures, we recommend the use of CREUSABRO 8000 or DURANOX 12.
| Main applications of Dursteel 510 wear-resistant steel | Hardness | Mechanical properties of HB510 steel | Impact strength | Dimensions and sizes available from stock |
| Components subject to heavy wear, shredders, crushers, linings, chutes, knives, buckets, etc. | 450-540 HB | Typical values thickness 20 mm
Rp 0.2 : 1300 MPa Rm : 1600 MPa A% : 8 |
Typical values Thickness 20 mm
Impact energy 30d at -40°C |
|
Recommanded welding consumables for Dursteel wear resistant steel welding :
- EASYCOR 70M : Slag-free copper-plated tubular cored wire for flat welding
- EASYCOR 70R : Slagged cored wire welded in any position
- EASYCOR 700M : High tensile strength copper-coated tubular cored wire for flat welding
- EASYCOR 700R : High strength pinch cored wire for welding in any position
- CORINOX 307G : Stainless steel cored wire for heterogeneous assembly
- CORINOX 312G : Stainless steel cored wire with high mechanical properties for heterogeneous assembly
Recommended minimum preheating and inter-pass temperatures depending on thickness in mm
