Dursteel 410
Abrasion-Resistant Steel 400 HB
Dursteel 410 is a quenched abrasion-resistant steel with a nominal hardness of 410 HB.
It withstands severe wear conditions, and its high yield strength allows it to absorb significant impacts without deformation.
In addition to its hardness and toughness, the exceptional quality of the quenching process makes Dursteel 410 easy to work with, offering good formability, machinability, and weldability.
Technical & General Information
Hardness :
370–430 HB
Formats et épaisseurs :
2000×1000 : 2mm
2000×1000 / 2500×1500 / 3000×1500 : 3mm
2000×1000 / 2500×1500 / 3000×1500 / 3000×2500 : 4 mm
2000×1000 / 2500×1500 / 3000×1500 : 5 mm
2000×1000 / 2500×1500 / 3000×1500 / 3000×2000 / 3000×2500 : 6 mm
2000×1000 / 2500×1500 / 3000×1500 / 3000×2000 / 3000×2500 : 8-120 mm
Other thicknesses and formats available on request
Mechanical Properties :
Yield Strength RP 0.2: 1100 MPa*
Tensile Strength RM: 1250 MPa*
Elongation A%: 10*
Impact Toughness: 50 J at –40°C*
*Typical values for 20 mm thickness
Fabrication :
Dursteel 410 offers excellent rolling, forging, and bending capabilities.
Maintains properties up to 250°C.
Use for heat treatments or hot-dip galvanizing is not recommended.
For higher temperature applications, consider Creusabro steels.
Weldability :
Compatible with Easycor 70M / 70R / 700M / 700R
Corinox 307G / 312G
Main Applications – Dursteel 410
- Linings
- Wear blades
- Buckets
- Dumpers
- Hoppers
- Chutes
- Hammers
- Knives
- Skip buckets
- Bulldozers
- Screw conveyors
- Screens
- Tongs
- …
Need advice, a wear audit, or a quotation?
A requirement, a project, or simply the need to review possible improvements to address wear issues? Benefit from our expertise.
Contact our team of specialists by filling out the contact form.
We are ready to take on your next challenges.