Dursteel ®
Conventional Abrasion-Resistant Steel
A range of abrasion resistant steels developed by wear specialists over more than 50 years.
DURSTEEL® steels are designed to meet demanding requirements for hardness,
toughness and ease of fabrication.
They are used for the construction, protection and repair of industrial
equipment in demanding wear applications.
Dursteel®: Grades Tailored to Every Need
Through the Dursteel® range, PRODUR offers high-quality abrasion-resistant steels with hardness levels from 400 to 500 HB, as well as specific grades with high toughness and non-magnetic properties.
Dursteel maintains its properties up to 250°C. Using Dursteel for heat treatments or hot-dip galvanizing is not recommended.
For applications requiring abrasion-resistant steel at higher temperatures, we recommend using our Creusabro® steels or our Duraplate® D45T overlay plates.
Dursteel® vs Creusabro®: How to Choose ?
Dursteel® positions itself as the ultimate cost-effective choice for applications requiring wear resistance, offering an optimal balance between price and quality.
Its robustness and reliability make it a high-performance solution for a wide range of applications.
However, when maximum service life is critical, Creusabro® steels clearly outperform conventional options.
Creusabro® 4800 and 6400 last up to 100% longer than standard 400 and 450 HB quenched steels, respectively, while Creusabro® 8000 and Dual extend service life up to 100% compared with conventional 500 HB steels.
Dursteel® 410
Abrasion-resistant steel 400 HB
Dursteel® 410 stands out for its robustness and ease of fabrication. Ideal for equipment exposed to moderate wear, it offers excellent workability, simplifying bending, welding, and machining in the workshop.
Thickness : 2–130 mm
Main Applications :
Linings, wear blades, buckets, hoppers, chutes, hammers, knives, bulldozers, screw conveyors, screens…
Dursteel® 460
Abrasion-resistant steel 450 HB
Dursteel® 460 is a quenched steel resistant to abrasion with a nominal hardness of 460 HB. It withstands severe wear conditions, and its high yield strength allows it to absorb significant impacts without deformation.
Thickness : 3–80 mm
Main Applications :
Linings and wear plates, cones, hammers, blades, earthmoving equipment
Dursteel® 510
Abrasion-resistant steel 500 HB
Dursteel® 510 is a quenched steel designed to withstand extremely severe wear conditions. It offers double the average service life of 400 HB steels and a 50% increase over 450 HB steels.
Thickness : 3–80 mm
Main Applications:
Linings and wear plates for hoppers, chutes, knives, hammers
Dursteel® MN
Manganese Steel – 210 HB → 540 HB
Thickness : 2–25 mm
Main Applications:
Anti-fracture bars, screen grids, crusher hammers, wear plates, impact plates
Dursteel® Tuffplate
Grade for Thick Sections – 340 HB
Thickness : 40–150 mm
Main Applications :
Wear parts for thick sections: earthmoving blades (Delta, semi-Delta), wear plates in crushers
Need advice, a wear audit, or a quotation?
A requirement, a project, or simply the need to review possible improvements to address wear issues? Benefit from our expertise.
Contact our team of specialists by filling out the contact form.
We are ready to take on your next challenges.