Dursteel 510
Abrasion-Resistant Steel 450 HB
Dursteel 510 is a high-strength quenched steel with a nominal hardness of 500 HB. It withstands very severe wear conditions.
Its mechanical properties are achieved through quenching. In addition to its hardness and toughness, the exceptional quality of the quenching allows good workability of the Dursteel 510 wear-resistant steel.
Technical & General Information
Hardness: :
470-530 HB
Dimensions & Thicknesses :
On request: 4 mm
2000×1000 / 2500×1500 / 3000×1500 / 3000×2000 / 3000×2500: 5 mm
2000×1000 / 2500×1500 / 3000×1500 / 3000×2000 / 3000×2500: 6 mm
2000×1000 / 2500×1500 / 3000×1500 / 3000×2000 / 3000×2500: 8–50 mm
On request: 6–80 mm
Other thicknesses and sizes available on request
Mechanical Properties :
Yield strength RP 0.2: 1400 MPa*
Tensile strength RM: 1600 MPa*
Elongation A%: 8*
Impact toughness: 30 J at −40 °C*
*Typical value for 20 mm thickness
Fabrication :
Dursteel 510 has good roll, bending, and forming properties. Special precautions are necessary during handling and installation.
Weldability :
Easycor 70M / 700M
Corinox 307G / 312 G
Main applications of Dursteel 510®
- Components subjected to heavy wear
- Crushers
- Jaw crushers
- Wear plates / Liners
- Chutes / Hoppers
- Knives / Blades
- Buckets / Skip bins
- …
Why choose Dursteel 510 ?
Reduced risk of cracking thanks to its high toughness and excellent surface condition
Increase equipment service life by up to 60% compared to conventional 450 HB steels, without the formation of cracks
Longer intervals between maintenance reduce upkeep costs and boost productivity
Achieve thinner but higher-performing wear protection assemblies to reduce vehicle weight and increase payload
Need advice, a wear audit, or a quotation?
A requirement, a project, or simply the need to review possible improvements to address wear issues? Benefit from our expertise.
Contact our team of specialists by filling out the contact form.
We are ready to take on your next challenges.